7 material differences · fewer than 12
Tractor oneFendt Favorit 610 S1972–1976No measured PTO figureTractor twoJ.I. Case 941 GP1959–1969No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 610 S and the 941 GP → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Favorit 610 S | 941 GP | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.4 hp | 83.0 hp | — |
| Engine declared | MWM D 225-6 | — | — |
| Displacement declared | 5.10 L | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Favorit 610 S |
| Clutch declared | Single-disc dry clutch | Pedal-operated dry CASE single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 9.7 gpm · 36.8 L/min | 15.5 gpm · 58.7 L/min | +60% 941 GP |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,499 lb · 3,855 kg | 8,805 lb · 3,994 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 106.1 in · 2,696 mm | 108.0 in · 2,743 mm | — |
| Length declared | 172.5 in · 4,382 mm | 162.0 in · 4,115 mm | +6% Favorit 610 S |
| Width declared | 84.8 in · 2,154 mm | 85.2 in · 2,165 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 17.0 in · 432 mm | +6% Favorit 610 S |
| Turning radius, braked declared | 13.8 ft · 4.21 m | 10.8 ft · 3.30 m | +28% Favorit 610 S |
| Fuel tank declared | 137.4 qt · 130 L | 95.9–120.0 qt · 90.8–113.6 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 610 S sources
- Source: Traktorenlexikon, “Fendt Favorit 610 S”
- Source: Traktorenlexikon, “Fendt Favorit 4 S/SA”
J.I. Case 941 GP sources
- Source: Traktorenlexikon, “Case 941”