Fendt Favorit 610 S or J.I. Case 941 GP?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Favorit 610 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 941 GP has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The J.I. Case 941 GP suits loader and hydraulic implement work better on this data: 60% (21.9 L/min / 5.8 gpm) more hydraulic flow.
  • The Fendt Favorit 610 S suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
  • The Fendt Favorit 610 S suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Favorit 610 S and J.I. Case 941 GP, with the call on each
QuestionFavorit 610 S941 GPCall
Which puts more power through the PTO shaft?62.2 kW (83.4 hp)Traktorenlexikon, “Fendt Favorit 610 S”61.9 kW (83.0 hp)Traktorenlexikon, “Case 941”Not comparableNot comparable on power at the PTO shaft: the Favorit 610 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 941 GP has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Favorit 610 S and the 941 GP.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Favorit 610 S and the 941 GP.
Which pumps more oil for implements?36.8 L/min (9.7 gpm)Traktorenlexikon, “Fendt Favorit 610 S”58.7 L/min (15.5 gpm)Traktorenlexikon, “Case 941”AheadThe J.I. Case 941 GP has 60% more hydraulic flow (21.9 L/min / 5.8 gpm) than the Fendt Favorit 610 S (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,000 kg (6,614 lb)Traktorenlexikon, “Fendt Favorit 610 S”No figureNo call on three-point lift: no figure on record for the 941 GP.
Which is heavier, for traction?3,855 kg (8,499 lb)Traktorenlexikon, “Fendt Favorit 610 S”3,994 kg (8,805 lb)Traktorenlexikon, “Case 941”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,500 kg (14,330 lb)Traktorenlexikon, “Fendt Favorit 610 S”No figureNo call on maximum permissible mass: no figure on record for the 941 GP.
Which has the wider choice of gears?12Traktorenlexikon, “Fendt Favorit 610 S”6 to 8Traktorenlexikon, “Case 941”AheadThe Fendt Favorit 610 S has 50% more forward gears (4 gears) than the J.I. Case 941 GP (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Favorit 610 S and the 941 GP.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Fendt Favorit 610 S”25 km/h (15.5 mph)Traktorenlexikon, “Case 941”AheadThe Fendt Favorit 610 S has 20% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 941 GP (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fendt Favorit 610 S”540/1000 rpmTraktorenlexikon, “Case 941”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the Favorit 610 S and the 941 GP.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Fendt Favorit 610 S”2WDTraktorenlexikon, “Case 941”AheadThe Fendt Favorit 610 S is available with four-wheel drive; the J.I. Case 941 GP is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1972–19761959–1969Ahead (a fact, not an advantage)The Fendt Favorit 610 S is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 941 GP has 60% more hydraulic flow (21.9 L/min / 5.8 gpm) than the Fendt Favorit 610 S (both pump flow, as stated by the source).
  • The Fendt Favorit 610 S has 50% more forward gears (4 gears) than the J.I. Case 941 GP (both forward gears, as stated by the source).
  • The Fendt Favorit 610 S has 20% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 941 GP (both top speed forward, as stated by the source).
  • The Fendt Favorit 610 S is available with four-wheel drive; the J.I. Case 941 GP is two-wheel drive (as stated by the sources).
  • The Fendt Favorit 610 S is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Not comparable on power at the PTO shaft: the Favorit 610 S has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 941 GP has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources