9 material differences · fewer than 12
Tractor oneFendt Favorit 509 C1994–2000No measured PTO figureTractor twoHürlimann 909 XT1995–2004No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 509 C and the 909 XT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Favorit 509 C | 909 XT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.2 hp | 93.6 hp | — |
| Engine declared | MWM TD 226. B-4 | Hürlimann H-1000.4 WT-2 | differs |
| Displacement declared | 4.16 L | 4.00 L | — |
| Maximum torque declared | 281 lb·ft · 381 N·m | 243 lb·ft · 329 N·m | +16% Favorit 509 C |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Wet multi-plate drive clutch | Pedal-operated dry SLH single-plate clutch as driving clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 26.5 gpm · 100.2 L/min | 16.1 gpm · 61.0 L/min | +64% Favorit 509 C |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540/1000/540E/1000E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,957 lb · 4,970 kg | 9,480 lb · 4,300 kg | +16% Favorit 509 C |
| Wheelbase declared | 91.9 in · 2,333 mm | 93.4 in · 2,373 mm | — |
| Length declared | 164.6 in · 4,180 mm | 162.3 in · 4,123 mm | — |
| Width declared | 84.3 in · 2,140 mm | 88.2–98.4 in · 2,240–2,500 mm | differs |
| Ground clearance declared | 21.1 in · 536 mm | 16.3 in · 415 mm | +29% Favorit 509 C |
| Turning radius, braked declared | 13.1 ft · 4.00 m | 13.4 ft · 4.07 m | — |
| Fuel tank declared | 142.7 qt · 135 L | 147.9 qt · 140.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 509 C sources
- Source: Traktorenlexikon, “Fendt Favorit 509 C”
- Source: Traktorenlexikon, “Fendt Farmer 308”
Hürlimann 909 XT sources
- Source: Traktorenlexikon, “Hürlimann XT 909”