11 material differences · fewer than 12
Tractor oneFendt 207/F/FA2002–2009No measured PTO figureTractor twoNew Holland TD 70 D (A)2002–2008No measured PTO figure
Which should you choose?
Read our verdict on the 207/F/FA and the TD 70 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 207/F/FA | TD 70 D (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68 hp | 68.0 hp | — |
| Engine declared | — | IVECO 8035.25 C | — |
| Displacement declared | — | 2.93 L | — |
| Maximum torque declared | 195 lb·ft · 264 N·m | 173 lb·ft · 234 N·m | +13% 207/F/FA |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry multi-disc clutch | Dry LuK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 19.5 gpm · 74 L/min | 11.4 gpm · 43.0 L/min | +72% 207/F/FA |
| Pressure declared | — | 3,553 psi · 245 bar | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,456 lb · 2,475 kg | 6,010 lb · 2,726 kg | +10% TD 70 D (A) |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 79.8 in · 2,027 mm | 85.6 in · 2,175 mm | +7% TD 70 D (A) |
| Length declared | 134.4 in · 3,414 mm | 145.1 in · 3,685 mm | +8% TD 70 D (A) |
| Width declared | 52.0 in · 1,322 mm | 70.8–90.5 in · 1,799–2,299 mm | differs |
| Ground clearance declared | 11.5 in · 292 mm | 14.6 in · 371 mm | +27% TD 70 D (A) |
| Fuel tank declared | 74.0 qt · 70 L | 95.1 qt · 90.0 L | +29% TD 70 D (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 207/F/FA sources
- Source: Traktorenlexikon, “Fendt Farmer 207 F/FA”
New Holland TD 70 D (A) sources
- Source: Traktorenlexikon, “New Holland TD 70 D”