Fendt 207/F/FA or New Holland TD 70 D (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 207/F/FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 70 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt 207/F/FA suits loader and hydraulic implement work better on this data: 72% (31.0 L/min / 8.2 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 207/F/FA | TD 70 D (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51 kW (68 hp)Traktorenlexikon, “Fendt Farmer 207 F/FA” | 50.7 kW (68.0 hp)Traktorenlexikon, “New Holland TD 70 D” | Not comparableNot comparable on power at the PTO shaft: the 207/F/FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 70 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 207/F/FA and the TD 70 D (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 207/F/FA and the TD 70 D (A). |
| Which pumps more oil for implements? | 74 L/min (19.5 gpm)Traktorenlexikon, “Fendt Farmer 207 F/FA” | 43.0 L/min (11.4 gpm)Traktorenlexikon, “New Holland TD 70 D” | AheadThe Fendt 207/F/FA has 72% more hydraulic flow (31.0 L/min / 8.2 gpm) than the New Holland TD 70 D (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,714 kg (5,983 lb)Traktorenlexikon, “Fendt Farmer 207 F/FA” | 2,938 kg (6,477 lb)Traktorenlexikon, “New Holland TD 70 D” | Not comparableNot comparable on three-point lift: the 207/F/FA: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 207 F/FA”); the TD 70 D (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland TD 70 D”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,475 kg (5,456 lb)Traktorenlexikon, “Fendt Farmer 207 F/FA” | 2,726 kg (6,010 lb)Traktorenlexikon, “New Holland TD 70 D” | Ahead (a fact, not an advantage)The New Holland TD 70 D (A) is 10% heavier (251 kg / 553 lb) than the Fendt 207/F/FA (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Fendt Farmer 207 F/FA” | — | No figureNo call on maximum permissible mass: no figure on record for the TD 70 D (A). |
| Which has the wider choice of gears? | 21Traktorenlexikon, “Fendt Farmer 207 F/FA” | 12 to 20Traktorenlexikon, “New Holland TD 70 D” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 207/F/FA and the TD 70 D (A). |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Fendt Farmer 207 F/FA” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TD 70 D” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/750/1000 rpmTraktorenlexikon, “Fendt Farmer 207 F/FA” | 540/540E/1000 rpmTraktorenlexikon, “New Holland TD 70 D” | AheadThe Fendt 207/F/FA offers 750 rpm at the PTO, which the New Holland TD 70 D (A) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland TD 70 D” | No figureNo call on PTO independence: not stated for the 207/F/FA. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fendt Farmer 207 F/FA” | Two-wheel or four-wheel driveTraktorenlexikon, “New Holland TD 70 D” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2002–2009 | 2002–2008 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 207/F/FA has 72% more hydraulic flow (31.0 L/min / 8.2 gpm) than the New Holland TD 70 D (A) (both pump flow, as stated by the source).
- The New Holland TD 70 D (A) is 10% heavier (251 kg / 553 lb) than the Fendt 207/F/FA (both unladen weight, as stated by the source).
- The Fendt 207/F/FA offers 750 rpm at the PTO, which the New Holland TD 70 D (A) does not (as stated by the sources).
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 207/F/FA has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 70 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 207/F/FA: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Farmer 207 F/FA”); the TD 70 D (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland TD 70 D”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources