Fendt Farmer 204 P or International Harvester 785 (A)?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Fendt Farmer 204 P is ahead on top speed; the International Harvester 785 (A) is ahead on PTO speeds.

  • The International Harvester 785 (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The Fendt Farmer 204 P suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Farmer 204 P and International Harvester 785 (A), with the call on each
QuestionFarmer 204 P785 (A)Call
Which puts more power through the PTO shaft?45.6 kW (61.2 hp)Traktorenlexikon, “Fendt Farmer 204 P”45.6 kW (61.2 hp)Traktorenlexikon, “IHC 785 (XL)”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Farmer 204 P and the 785 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Farmer 204 P and the 785 (A).
Which pumps more oil for implements?32.7 L/min (8.6 gpm)Traktorenlexikon, “Fendt Farmer 204 P”No figureNo call on hydraulic flow: no figure on record for the 785 (A).
Which lifts more on the three-point hitch?2,090 kg (4,608 lb)Traktorenlexikon, “IHC 785 (XL)”No figureNo call on three-point lift: no figure on record for the Farmer 204 P.
Which is heavier, for traction?2,340 kg (5,159 lb)Traktorenlexikon, “Fendt Farmer 204 P”3,040 kg (6,702 lb)Traktorenlexikon, “IHC 785 (XL)”Ahead (a fact, not an advantage)The International Harvester 785 (A) is 30% heavier (700 kg / 1,543 lb) than the Fendt Farmer 204 P (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the Farmer 204 P and the 785 (A).
Which has the wider choice of gears?14Traktorenlexikon, “Fendt Farmer 204 P”8 to 16Traktorenlexikon, “IHC 785 (XL)”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Farmer 204 P and the 785 (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Fendt Farmer 204 P”25 km/h (15.5 mph)Traktorenlexikon, “IHC 785 (XL)”AheadThe Fendt Farmer 204 P has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 785 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fendt Farmer 204 P”540/1000 rpmTraktorenlexikon, “IHC 785 (XL)”AheadThe International Harvester 785 (A) offers 1000 rpm at the PTO, which the Fendt Farmer 204 P does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fendt Farmer 204 P”independentTraktorenlexikon, “IHC 785 (XL)”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Fendt Farmer 204 P”2WD / 4WDTraktorenlexikon, “IHC 785 (XL)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19871981–1990EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 785 (A) is 30% heavier (700 kg / 1,543 lb) than the Fendt Farmer 204 P (both unladen weight, as stated by the source).
  • The Fendt Farmer 204 P has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 785 (A) (both top speed forward, as stated by the source).
  • The International Harvester 785 (A) offers 1000 rpm at the PTO, which the Fendt Farmer 204 P does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources