12 material differences
Tractor oneFendt 819 Vario2010–2011No measured PTO figureTractor twoMassey Ferguson MF 8150 A1995–1999No measured PTO figure
Which should you choose?
Read our verdict on the 819 Vario and the MF 8150 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 819 Vario | MF 8150 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 177 hp | 177.7 hp | — |
| Engine declared | Deutz TCD 6.1 L6 | VALMET 620 DS | differs |
| Displacement declared | 6.06 L | 6.60 L | +9% MF 8150 A |
| Maximum torque declared | 637 lb·ft · 863 N·m | 479 lb·ft · 649 N·m | +33% 819 Vario |
| Transmission | |||
| Top speed declared | 37.3 mph · 60 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | multi-plate clutch | Pedal-operated dry VALEO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 51.0 gpm · 193.0 L/min | 14.1 gpm · 53.3 L/min | +262% 819 Vario |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,503 lb · 9,300 kg | 14,815 lb · 6,720 kg | +38% 819 Vario |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 25,353 lb · 11,500 kg | +22% 819 Vario |
| Wheelbase declared | 114.2 in · 2,900 mm | 115.7 in · 2,940 mm | — |
| Length declared | 207.6 in · 5,274 mm | 198.3 in · 5,038 mm | — |
| Width declared | 103.1 in · 2,620 mm | 83.5–103.7 in · 2,120–2,633 mm | differs |
| Ground clearance declared | 20.2 in · 513 mm | 18.2 in · 463 mm | +11% 819 Vario |
| Fuel tank declared | 533.6 qt · 505 L | 285.3 qt · 270.0 L | +87% 819 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 819 Vario sources
Source
- Source: Traktorenlexikon, “Fendt 819 Vario”
Massey Ferguson MF 8150 A sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 8150”