- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1995–1999
It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson 8150A specs: hp, weight, years
VALMET 620 DS six-cylinder diesel. The manufacturer claimed 177.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
177.7 hp
132.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 8150”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 14,815 lb
- 3-point lift
- 12,434 lb
- Hyd. flow
- 14.1 gpm
- Top speed
- 18.6–24.9 mph
Massey Ferguson 8150A specs: key facts
The Massey Ferguson 8150A was built from 1995 to 1999.
The Massey Ferguson 8150A has a claimed engine power (gross or net not stated) of 132.5 kW (177.7 hp); it has no measured PTO figure.
The Massey Ferguson 8150A was offered in two-wheel-drive and four-wheel-drive versions.
The Massey Ferguson 8150A has a VALMET 620 DS engine, a 6-cylinder 6.60 L diesel unit.
The Massey Ferguson 8150A weighs 6,720 kg (14,815 lb) unladen.
The Massey Ferguson 8150A has an independent rear PTO running at 540/540E/1000 rpm.
The three-point hitch of the Massey Ferguson 8150A lifts 5,640 kg (12,434 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson 8150A delivers 53.3 L/min (14.1 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 8150”
How does the 8150A compare with its class?
- Limitation:
A hydraulic pump flow of 53.3 L/min is low for its class — 48% below the median of 102 L/min across the 103 machines within 10% of its power that hold this figure.
- Strength:
32 forward gears is high for its class — 78% above the median of 18 across the 122 machines within 10% of its power that hold this figure.
- Limitation:
The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 135 tractors within 10% of its power, 12% carry one.
Derived by WhichTractor from 135 comparable records. How we work this out

How much horsepower does an 8150A have?
The only figure for the 8150A is 177.7 hp (132.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 8150”
What engine is in an 8150A?
An 8150A has a VALMET 620 DS, a 6-cylinder 6.60 L diesel engine.
| Make & model | VALMET 620 DS |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 402.5 ci · 6.60 L |
| Max torque | 479 lb·ft · 649 N·m @ 1,402 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 8150”
How much will an 8150A lift, and what is its hydraulic flow?
An 8150A lifts 12,434 lb (5,640 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 14.1 gpm · 53.3 L/min |
|---|---|
| Pressure | 2,901 psi · 200 bar |
| Hitch category | Category 2 |
| Lift at ends | 12,434 lb · 5,640 kg |
| Rear PTO | Independent, engine-driven, 540/540E/1000 rpm @ 1,993 engine rpmEngages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 8150”
What transmission does an 8150A have?
Transmission specifications for the 8150A are below.
| Clutch | Pedal-operated dry VALEO double clutch |
|---|---|
| Steering | Hydrostatic DANFOSS steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Massey Ferguson MF 8150”
How much does an 8150A weigh?
An 8150A weighs 14,815 lb (6,720 kg) unladen.
| Unladen weight | 14,815 lb · 6,720 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 25,353 lb · 11,500 kg |
| Wheelbase | 115.7 in · 2,940 mmtwo-wheel-drive version |
| Length | 198.3 in · 5,038 mm |
| Width | 83.5–103.7 in · 2,120–2,633 mm |
| Height | 119.4 in · 3,034 mm |
| Ground clearance | 18.2 in · 463 mm |
| Front track | 66.4–85.5 in · 1,687.000–2,172.000 mmOn record for 1 of 2 configurationsfour-wheel-drive version |
| Rear track | 72.9–82.9 in · 1,851–2,105 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 8150”
What oil does an 8150A take, and how much?
An 8150A engine takes 17.4 qt (16.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 17.4 qt · 16.5 LSource: Traktorenlexikon, “Massey Ferguson MF 8150” · single source, not independently verified |
| Hydraulic | 92.5 qt · 87.5 LSource: Traktorenlexikon, “Massey Ferguson MF 8150” · single source, not independently verified |
| Front axle | 3.8 qt · 3.6 LSource: Traktorenlexikon, “Massey Ferguson MF 8150” · single source, not independently verified |
| Cooling system | 31.4 qt · 29.7 LSource: Traktorenlexikon, “Massey Ferguson MF 8150” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with an 8150A?
Within 10% of its 177.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- Massey Ferguson 3680177.7 hp engine, claimed · 1989–1990Side by side with the 8150A →
- Fiat 180-90 (DT)177.7 hp engine, claimed · 1984–1994Side by side with the 8150A →
- Hürlimann SX 1800177.6 hp engine, claimed · 2000–2004Side by side with the 8150A →
- Lamborghini 180 Champion177.6 hp engine, claimed · 2000–2004Side by side with the 8150A →
- SAME Rubin 180177.6 hp engine, claimed · 2000–2004Side by side with the 8150A →
- Case-IH Magnum 7120177.6 hp engine, claimed · 1988–1993Side by side with the 8150A →
Common questions about the Massey Ferguson 8150A
Is an 8150A two-wheel drive or four-wheel drive?
The Massey Ferguson 8150A was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does an 8150A have?
An 8150A has a independent 540/540E/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Massey Ferguson MF 8150”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 8150 — CC BY-SA 4.0, WIKIBOOKS-TL-87641 · revision 992213. Wikibooks contributors (Traktorenlexikon). Original document