12 material differences
Tractor oneFahr D 60 L1952–1955No measured PTO figureTractor twoHürlimann D 200 S1966–1971No measured PTO figure
Which should you choose?
Read our verdict on the D 60 L and the D 200 S → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | D 60 L | D 200 S | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 64.1 hp | +8% D 200 S |
| Engine declared | KHD F4L 514 | Hürlimann D-120 | differs |
| Displacement declared | 5.32 L | 4.43 L | +20% D 60 L |
| Maximum torque declared | 201 lb·ft · 273 N·m | — | — |
| Transmission | |||
| Top speed declared | 20.1 mph · 32.3 km/h | 12.4 mph · 20 km/h | +61% D 60 L |
| Clutch declared | Pedal operated dry Fichtel and Sachs single plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | 8.5 gpm · 32.0 L/min | +73% D 200 S |
| Pressure declared | 1,707 psi · 118 bar | 2,418 psi · 167 bar | +42% D 200 S |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,628 lb · 3,460 kg | 5,776 lb · 2,620 kg | +32% D 60 L |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 90.6 in · 2,300 mm | 80.7 in · 2,050 mm | +12% D 60 L |
| Length declared | 153.1 in · 3,890 mm | 131.9 in · 3,350 mm | +16% D 60 L |
| Width declared | 78.2 in · 1,987 mm | 67.7 in · 1,720 mm | +16% D 60 L |
| Ground clearance declared | 15.7 in · 400 mm | 16.1 in · 410 mm | — |
| Turning radius, braked declared | 12.6 ft · 3.85 m | 10.5 ft · 3.20 m | +20% D 60 L |
| Fuel tank declared | 95.1 qt · 90 L | 42.3 qt · 40.0 L | +125% D 60 L |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 60 L sources
Source
- Source: Traktorenlexikon, “Fahr D 60 L”
- Source: Traktorenlexikon, “Fahr D 55 L”
Hürlimann D 200 S sources
Source
- Source: Traktorenlexikon, “Hürlimann D 200 S”