Fahr D 400 C vs Güldner G 45 A (S)

12 material differences

Tractor one

1954–1957

No measured PTO figure

Tractor two

1965–1969

No measured PTO figure

Which should you choose?

Read our verdict on the D 400 C and the G 45 A (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Fahr D 400 C and Güldner G 45 A (S), field by field
Field	D 400 C	G 45 A (S)	Gap
Engine
Engine power, claimed claimed	44.1 hp	44.1 hp	—
Engine declared	KHD F3L 514	Güldner 4 L 79	differs
Displacement declared	3.99 L	3.14 L	+27% D 400 C
Maximum torque declared	164 lb·ft · 223 N·m	127 lb·ft · 173 N·m	+29% D 400 C
Transmission
Top speed declared	12.9–18.6 mph · 20.8–30.0 km/h	12.4 mph · 20 km/h	differs
Clutch declared	Pedal operated dry Fichtel & Sachs single-plate clutch	Pedal operated dry double clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	4.9 gpm · 18.5 L/min	—	—
Pressure declared	1,707 psi · 118 bar	2,134 psi · 147 bar	+25% G 45 A (S)
Three-point lift at ends declared	—	4,211 lb · 1,910 kg	—
Rear PTO speeds declared	575 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,666 lb · 2,570 kg	5,302 lb · 2,405 kg	+7% D 400 C
Maximum permissible mass declared	8,818 lb · 4,000 kg	8,818 lb · 4,000 kg	—
Wheelbase declared	82.7 in · 2,100 mm	82.8 in · 2,102 mm	—
Length declared	134.3 in · 3,410 mm	140.3 in · 3,564 mm	—
Width declared	73.4 in · 1,865 mm	67.7 in · 1,720 mm	+8% D 400 C
Height declared	91.5 in · 2,325 mm	60.7 in · 1,541 mm	+51% D 400 C
Ground clearance declared	16.2 in · 412 mm	14.8 in · 377 mm	+9% D 400 C
Turning radius, braked declared	12.0 ft · 3.65 m	12.3 ft · 3.75 m	—
Fuel tank declared	68.7 qt · 65 L	50.7 qt · 48 L	+35% D 400 C

Source

Source