Fahr D 30 UL vs International Harvester D-430

10 material differences · fewer than 12

Tractor one

1951

No measured PTO figure

Tractor two

1956–1962

No measured PTO figure

Which should you choose?

Read our verdict on the D 30 UL and the D-430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fahr D 30 UL and International Harvester D-430, field by field
Field	D 30 UL	D-430	Gap
Engine
Engine power, claimed claimed	29.6 hp	29.6 hp	—
Engine declared	KHD F2L 514	INTERNATIONAL-HARVESTER DD-132	differs
Displacement declared	2.66 L	2.18 L	+22% D 30 UL
Maximum torque declared	105 lb·ft · 142 N·m	90 lb·ft · 122 N·m	+16% D 30 UL
Transmission
Top speed declared	12.2 mph · 19.6 km/h	12.4 mph · 20 km/h	—
Clutch declared	Pedal operated dry Fichtel & Sachs single plate clutch	Foot-operated dry single-plate clutch from Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	—	4.1 gpm · 15.5 L/min	—
Pressure declared	3,129 psi · 216 bar	—	—
Three-point lift at ends declared	—	1,323 lb · 600 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,696 lb · 2,130 kg	3,660 lb · 1,660 kg	+28% D 30 UL
Maximum permissible mass declared	—	4,409 lb · 2,000 kg	—
Wheelbase declared	86.4 in · 2,195 mm	74.0 in · 1,880 mm	+17% D 30 UL
Length declared	117.7 in · 2,990 mm	115.4 in · 2,930 mm	—
Width declared	59.6 in · 1,515 mm	64.6 in · 1,640 mm	+8% D-430
Height declared	74.4 in · 1,890 mm	61.0 in · 1,550 mm	+22% D 30 UL
Ground clearance declared	11.8 in · 300 mm	15.2 in · 385 mm	+28% D-430
Turning radius, braked declared	—	9.2 ft · 2.80 m	—
Fuel tank declared	31.7 qt · 30 L	31.7–58.1 qt · 30.0–55.0 L	differs

Source

Source