Fahr D 28 UW vs International Harvester D-324 Standard
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 28 UW and the D-324 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 28 UW | D-324 Standard | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.6 hp | 23.7 hp | +16% D 28 UW |
| Engine declared | Güldner 2F | INTERNATIONAL-HARVESTER DD-111 | differs |
| Displacement declared | 2.60 L | 1.83 L | +42% D 28 UW |
| Maximum torque declared | 100 lb·ft · 135 N·m | 73 lb·ft · 99 N·m | +36% D 28 UW |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.8 mph · 19 km/h | +5% D 28 UW |
| Clutch declared | — | Pedal operated dry single plate clutch | — |
| Hydraulics & hitch | |||
| Three-point lift at ends declared | — | 1,323 lb · 600 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,740 lb · 2,150 kg | 3,386 lb · 1,536 kg | +40% D 28 UW |
| Wheelbase declared | 85.4 in · 2,170 mm | 70.0 in · 1,779 mm | +22% D 28 UW |
| Length declared | 126.8 in · 3,220 mm | 108.3 in · 2,750 mm | +17% D 28 UW |
| Width declared | 61.6 in · 1,565 mm | 64.6 in · 1,640 mm | — |
| Height declared | 70.9 in · 1,800 mm | 61.0 in · 1,550 mm | +16% D 28 UW |
| Ground clearance declared | 11.8 in · 300 mm | 15.1 in · 383 mm | +28% D-324 Standard |
| Turning radius, braked declared | — | 9.2 ft · 2.80 m | — |
| Fuel tank declared | 31.7 qt · 30 L | 31.7 qt · 30.0 L | — |
Fahr D 28 UW sources
Source
- Source: Traktorenlexikon, “Fahr D 28 U”
- Source: Traktorenlexikon, “Güldner AF 30”
International Harvester D-324 Standard sources
Source
- Source: Traktorenlexikon, “McCormick D-324 Standard”
- Source: Traktorenlexikon, “McCormick D-324 Farmall”