Fahr D 180 H vs International Harvester D-324 Standard
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 180 H and the D-324 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | D 180 H | D-324 Standard | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 23.7 hp | 23.7 hp | — |
| Engine declared | MWM AKD-12 Z or AKD-112 Z | INTERNATIONAL-HARVESTER DD-111 | differs |
| Displacement declared | 1.81 L | 1.83 L | — |
| Maximum torque declared | 66 lb·ft · 89 N·m | 73 lb·ft · 99 N·m | +11% D-324 Standard |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.8 mph · 19 km/h | +5% D 180 H |
| Clutch declared | — | Pedal operated dry single plate clutch | — |
| Hydraulics & hitch | |||
| Pressure declared | 3,129 psi · 216 bar | — | — |
| Three-point lift at ends declared | — | 1,323 lb · 600 kg | — |
| Rear PTO speeds declared | 600 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,142 lb · 1,425 kg | 3,386 lb · 1,536 kg | +8% D-324 Standard |
| Maximum permissible mass declared | 4,409 lb · 2,000 kg | — | — |
| Wheelbase declared | 71.6 in · 1,818 mm | 70.0 in · 1,779 mm | — |
| Length declared | 110.6 in · 2,810 mm | 108.3 in · 2,750 mm | — |
| Width declared | 61.5 in · 1,562 mm | 64.6 in · 1,640 mm | — |
| Height declared | 62.2 in · 1,580 mm | 61.0 in · 1,550 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 15.1 in · 383 mm | — |
| Turning radius, braked declared | 8.4 ft · 2.55 m | 9.2 ft · 2.80 m | +10% D-324 Standard |
| Fuel tank declared | 31.7 qt · 30 L | 31.7 qt · 30.0 L | — |
Fahr D 180 H sources
Source
- Source: Traktorenlexikon, “Fahr D 180 H”
International Harvester D-324 Standard sources
Source
- Source: Traktorenlexikon, “McCormick D-324 Standard”
- Source: Traktorenlexikon, “McCormick D-324 Farmall”