10 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 921982–1983No measured PTO figureTractor twoSOMECA 900 (TD)1968–1971No measured PTO figure
Which should you choose?
Read our verdict on the DX 92 and the 900 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | DX 92 | 900 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 89 hp | 88.8 hp | — |
| Engine declared | KHD BF4L 913 | FIAT 8065.01.000 | differs |
| Displacement declared | 4.09 L | 4.68 L | +14% 900 (TD) |
| Maximum torque declared | 235 lb·ft · 318 N·m | 203 lb·ft · 275 N·m | +16% DX 92 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 12.8 gpm · 48.6 L/min | 11.5 gpm · 43.5 L/min | +12% DX 92 |
| Pressure declared | 3,481 psi · 240 bar | 2,843 psi · 196 bar | +22% DX 92 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,477 lb · 3,845 kg | 7,363 lb · 3,340 kg | +15% DX 92 |
| Maximum permissible mass declared | 13,669 lb · 6,200 kg | — | — |
| Wheelbase declared | 91.7 in · 2,330 mm | 97.6 in · 2,480 mm | +6% 900 (TD) |
| Length declared | 159.1 in · 4,040 mm | 164.2 in · 4,170 mm | — |
| Width declared | 90.7 in · 2,304 mm | 78.7–99.7 in · 1,998–2,532 mm | differs |
| Ground clearance declared | 23.2 in · 590 mm | 17.4 in · 442 mm | +33% DX 92 |
| Turning radius, braked declared | — | 12.5 ft · 3.81 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 122.6 qt · 116.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 92 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 92”
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
SOMECA 900 (TD) sources
- Source: Traktorenlexikon, “Someca 900”