Deutz-Fahr DX 92 or SOMECA 900 (TD)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DX 92 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 900 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr DX 92 suits loader and hydraulic implement work better on this data: 12% (5.1 L/min / 1.3 gpm) more hydraulic flow and 68% (1,540 kg / 3,395 lb) more three-point lift.
  • The Deutz-Fahr DX 92 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr DX 92 and SOMECA 900 (TD), with the call on each
QuestionDX 92900 (TD)Call
Which puts more power through the PTO shaft?66 kW (89 hp)Traktorenlexikon, “Deutz-Fahr DX 92”66.2 kW (88.8 hp)Traktorenlexikon, “Someca 900”Not comparableNot comparable on power at the PTO shaft: the DX 92 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 900 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the DX 92 and the 900 (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the DX 92 and the 900 (TD).
Which pumps more oil for implements?48.6 L/min (12.8 gpm)Traktorenlexikon, “Deutz-Fahr DX 92”43.5 L/min (11.5 gpm)Traktorenlexikon, “Someca 900”AheadThe Deutz-Fahr DX 92 has 12% more hydraulic flow (5.1 L/min / 1.3 gpm) than the SOMECA 900 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr DX 92”2,260 kg (4,982 lb)Traktorenlexikon, “Someca 900”AheadThe Deutz-Fahr DX 92 has 68% more lift (1,540 kg / 3,395 lb) than the SOMECA 900 (TD) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,845 kg (8,477 lb)Traktorenlexikon, “Deutz-Fahr DX 92”3,340 kg (7,363 lb)Traktorenlexikon, “Someca 900”Ahead (a fact, not an advantage)The Deutz-Fahr DX 92 is 15% heavier (505 kg / 1,113 lb) than the SOMECA 900 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Deutz-Fahr DX 92”No figureNo call on maximum permissible mass: no figure on record for the 900 (TD).
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr DX 92”12Traktorenlexikon, “Someca 900”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the DX 92 and the 900 (TD).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr DX 92”25 km/h (15.5 mph)Traktorenlexikon, “Someca 900”AheadThe Deutz-Fahr DX 92 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 900 (TD) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr DX 92”540/1000 rpmTraktorenlexikon, “Someca 900”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr DX 92”independentTraktorenlexikon, “Someca 900”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Deutz-Fahr DX 92”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 900”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1982–19831968–1971Ahead (a fact, not an advantage)The Deutz-Fahr DX 92 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr DX 92 has 12% more hydraulic flow (5.1 L/min / 1.3 gpm) than the SOMECA 900 (TD) (both pump flow, as stated by the source).
  • The Deutz-Fahr DX 92 has 68% more lift (1,540 kg / 3,395 lb) than the SOMECA 900 (TD) (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr DX 92 is 15% heavier (505 kg / 1,113 lb) than the SOMECA 900 (TD) (both unladen weight, as stated by the source).
  • The Deutz-Fahr DX 92 has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 900 (TD) (both top speed forward, as stated by the source).
  • The Deutz-Fahr DX 92 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the DX 92 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 900 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources