Deutz-Fahr DX 86 vs Renault 90-34 TX

6 material differences · fewer than 12

Tractor one

1982–1983

No measured PTO figure

Tractor two

1988–1995

No measured PTO figure

Which should you choose?

Read our verdict on the DX 86 and the 90-34 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 86 and Renault 90-34 TX, field by field
Field	DX 86	90-34 TX	Gap
Engine
Engine power, claimed claimed	80 hp	81.9 hp	—
Engine declared	KHD BF4L 913 T	MWM D 226-4	differs
Displacement declared	4.09 L	4.15 L	—
Maximum torque declared	211 lb·ft · 286 N·m	191 lb·ft · 259 N·m	+10% DX 86
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.5 gpm · 39.6 L/min	10.9 gpm · 41.2 L/min	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	10,075 lb · 4,570 kg	+20% 90-34 TX
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,091 lb · 3,670 kg	8,532 lb · 3,870 kg	+5% 90-34 TX
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	91.7 in · 2,330 mm	94.3 in · 2,394 mm	—
Length declared	159.1 in · 4,040 mm	159.8 in · 4,058 mm	—
Width declared	90.6 in · 2,300 mm	75.9 in · 1,929 mm	+19% DX 86
Height declared	105.1 in · 2,670 mm	109.1 in · 2,770 mm	—
Ground clearance declared	20.9 in · 530 mm	18.1 in · 461 mm	+15% DX 86
Turning radius, braked declared	—	14.2 ft · 4.32 m	—
Fuel tank declared	126.8 qt · 120 L	126.8 qt · 120.0 L	—

Source

Source