Deutz-Fahr DX 86 or Renault 90-34 TX?

Which should you choose?

On performance, every comparable figure that differs favours the Renault 90-34 TX: three-point lift. It is also ahead on forward gears.

  • The Renault 90-34 TX suits loader and hydraulic implement work better on this data: 20% (770 kg / 1,698 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr DX 86 and Renault 90-34 TX, with the call on each
QuestionDX 8690-34 TXCall
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr DX 86”54.9 kW (73.6 hp)Traktorenlexikon, “Renault 90-34 TX R7772”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the DX 86 and the 90-34 TX.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the DX 86 and the 90-34 TX.
Which pumps more oil for implements?39.6 L/min (10.5 gpm)Traktorenlexikon, “Deutz-Fahr DX 86”41.2 L/min (10.9 gpm)Traktorenlexikon, “Renault 90-34 TX R7772”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr DX 86”4,570 kg (10,075 lb)Traktorenlexikon, “Renault 90-34 TX R7772”AheadThe Renault 90-34 TX has 20% more lift (770 kg / 1,698 lb) than the Deutz-Fahr DX 86 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,670 kg (8,091 lb)Traktorenlexikon, “Deutz-Fahr DX 86”3,870 kg (8,532 lb)Traktorenlexikon, “Renault 90-34 TX R7772”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,000 kg (13,228 lb)Traktorenlexikon, “Renault 90-34 TX R7772”No figureNo call on maximum permissible mass: no figure on record for the DX 86.
Which has the wider choice of gears?15 to 18Traktorenlexikon, “Deutz-Fahr DX 86”24Traktorenlexikon, “Renault 90-34 TX R7772”AheadThe Renault 90-34 TX has 33% more forward gears (6 gears) than the Deutz-Fahr DX 86 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the DX 86 and the 90-34 TX.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr DX 86”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 90-34 TX R7772”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr DX 86”540/1000 rpmTraktorenlexikon, “Renault 90-34 TX R7772”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr DX 86”independentTraktorenlexikon, “Renault 90-34 TX R7772”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Deutz-Fahr DX 86”4WDTraktorenlexikon, “Renault 90-34 TX R7772”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1982–19831988–1995Ahead (a fact, not an advantage)The Renault 90-34 TX is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault 90-34 TX has 20% more lift (770 kg / 1,698 lb) than the Deutz-Fahr DX 86 (both lift at the hitch ends, as stated by the source).
  • The Renault 90-34 TX has 33% more forward gears (6 gears) than the Deutz-Fahr DX 86 (both forward gears, as stated by the source).
  • The Renault 90-34 TX is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources