11 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 7.10 A1984–1989No measured PTO figureTractor twoZETOR 161451984–1990No measured PTO figure

Which should you choose?

Read our verdict on the DX 7.10 A and the 16145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 7.10 A and ZETOR 16145, field by field
Field	DX 7.10 A	16145	Gap
Engine
Engine power, claimed claimed	157.0 hp	157.8 hp	—
Engine declared	KHD BF6L 913.118/2	—	—
Displacement declared	6.13 L	—	—
Maximum torque declared	415 lb·ft · 563 N·m	356 lb·ft · 483 N·m	+17% DX 7.10 A
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry two-plate clutch	pedal-operated dry ZTS single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.2 L/min	12.2 gpm · 46.3 L/min	+32% DX 7.10 A
Pressure declared	3,481 psi · 240 bar	2,828 psi · 195 bar	+23% DX 7.10 A
Rear PTO speeds declared	1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,206 lb · 5,990 kg	11,244 lb · 5,100 kg	+17% DX 7.10 A
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	111.3 in · 2,826 mm	106.3 in · 2,700 mm	—
Length declared	187.8 in · 4,770 mm	183.7 in · 4,665 mm	—
Width declared	93.3 in · 2,370 mm	86.2–89.8 in · 2,190–2,280 mm	differs
Height, over the cab declared	107.5 in · 2,730 mm	106.1 in · 2,695 mm	—
Ground clearance declared	19.3 in · 490 mm	12.6 in · 320 mm	+53% DX 7.10 A
Turning radius, braked declared	22.0 ft · 6.72 m	17.0 ft · 5.17 m	+30% DX 7.10 A
Fuel tank declared	158.5 qt · 150 L	206.1 qt · 195.0 L	+30% 16145

Source

Source