Deutz-Fahr DX 6.10 vs Hürlimann 909 XT

11 material differences · fewer than 12

Tractor one

1983–1990

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.10 and the 909 XT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.10 and Hürlimann 909 XT, field by field
Field	DX 6.10	909 XT	Gap
Engine
Engine power, claimed claimed	98.2 hp	93.6 hp	—
Engine declared	KHD F6L 912.74	Hürlimann H-1000.4 WT-2	differs
Displacement declared	5.65 L	4.00 L	+41% DX 6.10
Maximum torque declared	263 lb·ft · 356 N·m	243 lb·ft · 329 N·m	+8% DX 6.10
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry SLH single-plate clutch as driving clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	14.7 gpm · 55.6 L/min	16.1 gpm · 61.0 L/min	+10% 909 XT
Three-point lift at ends declared	11,464 lb · 5,200 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	10,472 lb · 4,750 kg	9,480 lb · 4,300 kg	+10% DX 6.10
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	93.4 in · 2,373 mm	+14% DX 6.10
Length declared	179.1 in · 4,550 mm	162.3 in · 4,123 mm	+10% DX 6.10
Width declared	90.7 in · 2,304 mm	88.2 in · 2,240 mm	—
Height declared	111.0 in · 2,820 mm	105.5 in · 2,680 mm	—
Ground clearance declared	20.1 in · 510 mm	16.3 in · 415 mm	+23% DX 6.10
Turning radius, braked declared	15.9 ft · 4.86 m	13.4 ft · 4.07 m	+19% DX 6.10
Fuel tank declared	126.8 qt · 120 L	147.9 qt · 140.0 L	+17% 909 XT

Source

Source