13 material differences

Tractor oneDeutz-Fahr DX 6.051987–1991No measured PTO figureTractor twoNew Holland TD 95 D (A)2002–2004No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the TD 95 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and New Holland TD 95 D (A), field by field
Field	DX 6.05	TD 95 D (A)	Gap
Engine
Engine power, claimed claimed	97 hp	96.7 hp	—
Engine declared	KHD F6L 912	IVECO 8045.25-K 513	differs
Displacement declared	5.65 L	3.91 L	+45% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	207 lb·ft · 280 N·m	+29% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	11.9 gpm · 45.2 L/min	+8% DX 6.05
Pressure declared	3,481 psi · 240 bar	3,553 psi · 245 bar	—
Three-point lift, at the coupling points declared	11,464 lb · 5,200 kg	7,859 lb · 3,565 kg	+46% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	6,790 lb · 3,080 kg	+47% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	94.0 in · 2,388 mm	+12% DX 6.05
Length declared	175.7 in · 4,464 mm	165.0 in · 4,192 mm	+6% DX 6.05
Width declared	87.0 in · 2,210 mm	77.8 in · 1,975 mm	+12% DX 6.05
Height, over the cab declared	106.7 in · 2,710 mm	104.4 in · 2,652 mm	—
Ground clearance declared	17.9 in · 455 mm	15.4 in · 390 mm	+17% DX 6.05
Turning radius, braked declared	16.0 ft · 4.87 m	—	—
Fuel tank declared	137.4 qt · 130 L	97.2 qt · 92.0 L	+41% DX 6.05

Source

Source