Deutz-Fahr DX 6.05 or New Holland TD 95 D (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DX 6.05 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 95 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr DX 6.05 suits loader and hydraulic implement work better on this data: 46% (1,635 kg / 3,605 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DX 6.05 | TD 95 D (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 72 kW (97 hp)Traktorenlexikon, “Deutz-Fahr DX 6.05” | 72.1 kW (96.7 hp)Traktorenlexikon, “New Holland TD 95 D 2002-2004” | Not comparableNot comparable on power at the PTO shaft: the DX 6.05 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 95 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DX 6.05 and the TD 95 D (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DX 6.05 and the TD 95 D (A). |
| Which pumps more oil for implements? | 48.8 L/min (12.9 gpm)Traktorenlexikon, “Deutz-Fahr DX 6.05” | 45.2 L/min (11.9 gpm)Traktorenlexikon, “New Holland TD 95 D 2002-2004” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr DX 6.05” | 3,565 kg (7,859 lb)Traktorenlexikon, “New Holland TD 95 D 2002-2004” | AheadThe Deutz-Fahr DX 6.05 has 46% more lift (1,635 kg / 3,605 lb) than the New Holland TD 95 D (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,530 kg (9,987 lb)Traktorenlexikon, “Deutz-Fahr DX 6.05” | 3,080 kg (6,790 lb)Traktorenlexikon, “New Holland TD 95 D 2002-2004” | Ahead (a fact, not an advantage)The Deutz-Fahr DX 6.05 is 47% heavier (1,450 kg / 3,197 lb) than the New Holland TD 95 D (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,800 kg (14,991 lb)Traktorenlexikon, “Deutz-Fahr DX 6.05” | — | No figureNo call on maximum permissible mass: no figure on record for the TD 95 D (A). |
| Which has the wider choice of gears? | 15 to 18Traktorenlexikon, “Deutz-Fahr DX 6.05” | 12 to 20Traktorenlexikon, “New Holland TD 95 D 2002-2004” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the DX 6.05 and the TD 95 D (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr DX 6.05” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TD 95 D 2002-2004” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Deutz-Fahr DX 6.05” | 540 rpm / 1000 rpmTraktorenlexikon, “New Holland TD 95 D 2002-2004” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr DX 6.05” | — | No figureNo call on PTO independence: not stated for the TD 95 D (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr DX 6.05” | Two-wheel or four-wheel driveTraktorenlexikon, “New Holland TD 95 D 2002-2004” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–1991 | 2002–2004 | Ahead (a fact, not an advantage)The New Holland TD 95 D (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr DX 6.05 has 46% more lift (1,635 kg / 3,605 lb) than the New Holland TD 95 D (A) (both lift at the hitch ends, as stated by the source).
- The Deutz-Fahr DX 6.05 is 47% heavier (1,450 kg / 3,197 lb) than the New Holland TD 95 D (A) (both unladen weight, as stated by the source).
- The New Holland TD 95 D (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the DX 6.05 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 95 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources