10 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.051987–1991No measured PTO figureTractor twoFord 78101988–1991No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 7810 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Ford 7810, field by field
Field	DX 6.05	7810	Gap
Engine
Engine power, claimed claimed	97 hp	96.7 hp	—
Engine declared	KHD F6L 912	—	—
Displacement declared	5.65 L	—	—
Maximum torque declared	266 lb·ft · 360 N·m	294 lb·ft · 399 N·m	+11% 7810
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	18.2 gpm · 68.9 L/min	+41% 7810
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift, at the coupling points declared	11,464 lb · 5,200 kg	9,381 lb · 4,255 kg	+22% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	7,749 lb · 3,515 kg	+29% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	99.1 in · 2,516 mm	+6% DX 6.05
Length declared	175.7 in · 4,464 mm	165.5 in · 4,204 mm	+6% DX 6.05
Width declared	87.0 in · 2,210 mm	76.9 in · 1,953 mm	+13% DX 6.05
Height, over the cab declared	106.7 in · 2,710 mm	107.8 in · 2,739 mm	—
Ground clearance declared	17.9 in · 455 mm	24.0 in · 610 mm	+34% 7810
Turning radius, braked declared	16.0 ft · 4.87 m	—	—
Fuel tank declared	137.4 qt · 130 L	188.1 qt · 178.0 L	+37% 7810

Source

Source