Deutz-Fahr DX 6.05 vs Fiat 880-5 (DT)

16 material differences

Tractor one

1987–1991

No measured PTO figure

Tractor two

1980–1984

No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 880-5 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

16 material differences · 1 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Fiat 880-5 (DT), field by field
Field	DX 6.05	880-5 (DT)	Gap
Engine
Engine power, claimed claimed	97 hp	86.9 hp	+11% DX 6.05
Engine declared	KHD F6L 912	FIAT-IVECO 8055.04.200	differs
Displacement declared	5.65 L	4.58 L	+23% DX 6.05
Maximum torque declared	266 lb·ft · 360 N·m	218 lb·ft · 296 N·m	+22% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Independent dry double clutch	Dry FERODO or LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	10.9 gpm · 41.4 L/min	+18% DX 6.05
Pressure declared	3,481 psi · 240 bar	3,263 psi · 225 bar	+7% DX 6.05
Three-point lift at ends declared	11,464 lb · 5,200 kg	6,261 lb · 2,840 kg	+83% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	8,157 lb · 3,700 kg	+22% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	105.0 in · 2,667 mm	96.5 in · 2,451 mm	+9% DX 6.05
Length declared	175.7 in · 4,464 mm	144.5 in · 3,670 mm	+22% DX 6.05
Width declared	87.0 in · 2,210 mm	77.6 in · 1,970 mm	+12% DX 6.05
Height declared	106.7 in · 2,710 mm	100.8 in · 2,560 mm	+6% DX 6.05
Ground clearance declared	17.9 in · 455 mm	20.9 in · 530 mm	+16% 880-5 (DT)
Turning radius, braked declared	16.0 ft · 4.87 m	11.8 ft · 3.60 m	+35% DX 6.05
Fuel tank declared	137.4 qt · 130 L	122.6 qt · 116.0 L	+12% DX 6.05

Source

Source