Deutz-Fahr DX 4.10 vs SOMECA 780 (TD)

10 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1975–1983

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.10 and the 780 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.10 and SOMECA 780 (TD), field by field
Field	DX 4.10	780 (TD)	Gap
Engine
Engine power, claimed claimed	69.1 hp	77.0 hp	+11% 780 (TD)
Engine declared	KHD F4L 912	FIAT-IVECO 8045.04.277 (377)	differs
Displacement declared	3.77 L	3.67 L	—
Maximum torque declared	175 lb·ft · 237 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	—	dry FERODO or LuK double clutch	—
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40.0 L/min	6.9 gpm · 26.3 L/min	+52% DX 4.10
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	7,385 lb · 3,350 kg	+13% DX 4.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	5,313 lb · 2,410 kg	+63% DX 4.10
Wheelbase declared	94.5 in · 2,400 mm	89.2 in · 2,265 mm	+6% DX 4.10
Length declared	163.0 in · 4,140 mm	150.5 in · 3,823 mm	+8% DX 4.10
Width declared	90.6 in · 2,300 mm	75.1 in · 1,908 mm	+21% DX 4.10
Height declared	103.0 in · 2,615 mm	103.1 in · 2,620 mm	—
Ground clearance declared	16.7 in · 425 mm	17.2 in · 437 mm	—
Turning radius, braked declared	13.7 ft · 4.17 m	11.4 ft · 3.46 m	+21% DX 4.10
Fuel tank declared	132.1 qt · 125 L	84.5 qt · 80.0 L	+56% DX 4.10

Source

Source