Deutz-Fahr DX 4.10 vs Renault 85-12 TX

10 material differences · fewer than 12

Tractor one

1985–1988

No measured PTO figure

Tractor two

1986–1989

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.10 and the 85-12 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.10 and Renault 85-12 TX, field by field
Field	DX 4.10	85-12 TX	Gap
Engine
Engine power, claimed claimed	69.1 hp	77.0 hp	+11% 85-12 TX
Engine declared	KHD F4L 912	MWM D 226-4	differs
Displacement declared	3.77 L	4.15 L	+10% 85-12 TX
Maximum torque declared	175 lb·ft · 237 N·m	181 lb·ft · 245 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry LuK double clutch type 310/310 G	—
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40.0 L/min	10.9 gpm · 41.4 L/min	—
Pressure declared	3,481 psi · 240 bar	1,595 psi · 110 bar	+118% DX 4.10
Three-point lift at ends declared	8,378 lb · 3,800 kg	8,433 lb · 3,825 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	7,507 lb · 3,405 kg	+15% DX 4.10
Wheelbase declared	94.5 in · 2,400 mm	95.6 in · 2,428 mm	—
Length declared	163.0 in · 4,140 mm	154.9 in · 3,934 mm	—
Width declared	90.6 in · 2,300 mm	78.0 in · 1,980 mm	+16% DX 4.10
Height declared	103.0 in · 2,615 mm	109.3 in · 2,775 mm	+6% 85-12 TX
Ground clearance declared	16.7 in · 425 mm	14.8 in · 377 mm	+13% DX 4.10
Turning radius, braked declared	13.7 ft · 4.17 m	12.8 ft · 3.90 m	+7% DX 4.10
Fuel tank declared	132.1 qt · 125 L	108.8 qt · 103.0 L	+21% DX 4.10

Source

Source