Deutz-Fahr DX 4.10 vs IMR-RAKOVICA R-76 Standard

14 material differences

Tractor one

1985–1988

No measured PTO figure

Tractor two

1979–1989

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.10 and the R-76 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.10 and IMR-RAKOVICA R-76 Standard, field by field
Field	DX 4.10	R-76 Standard	Gap
Engine
Engine power, claimed claimed	69.1 hp	75.0 hp	+9% R-76 Standard
Engine declared	KHD F4L 912	IMR-PERKINS S-44 A/T	differs
Displacement declared	3.77 L	4.07 L	+8% R-76 Standard
Maximum torque declared	175 lb·ft · 237 N·m	181 lb·ft · 245 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated two-stage dry double clutch	—
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40.0 L/min	7.9 gpm · 29.9 L/min	+34% DX 4.10
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	5,104 lb · 2,315 kg	+64% DX 4.10
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	4,993 lb · 2,265 kg	+73% DX 4.10
Wheelbase declared	94.5 in · 2,400 mm	83.5 in · 2,120 mm	+13% DX 4.10
Length declared	163.0 in · 4,140 mm	134.6 in · 3,420 mm	+21% DX 4.10
Width declared	90.6 in · 2,300 mm	74.8 in · 1,900 mm	+21% DX 4.10
Height declared	103.0 in · 2,615 mm	66.3 in · 1,685 mm	+55% DX 4.10
Ground clearance declared	16.7 in · 425 mm	17.7 in · 450 mm	+6% R-76 Standard
Turning radius, braked declared	13.7 ft · 4.17 m	11.0 ft · 3.36 m	+24% DX 4.10
Fuel tank declared	132.1 qt · 125 L	63.4 qt · 60.0 L	+108% DX 4.10

Source

Source