Deutz-Fahr DX 3.80 AS vs VALMET 800

12 material differences

Tractor one

1985–1990

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.80 AS and the 800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.80 AS and VALMET 800, field by field
Field	DX 3.80 AS	800	Gap
Engine
Engine power, claimed claimed	74 hp	79 hp	+7% 800
Engine declared	KHD F4L 913	VALMET 420 DS or DSRE	differs
Displacement declared	4.09 L	4.40 L	+8% 800
Maximum torque declared	192 lb·ft · 260 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	10.6 gpm · 40.0 L/min	14.7 gpm · 55.7 L/min	+39% 800
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% DX 3.80 AS
Three-point lift at ends declared	5,291 lb · 2,400 kg	7,419 lb · 3,365 kg	+40% 800
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,275 lb · 3,300 kg	7,341 lb · 3,330 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	88.3 in · 2,244 mm	—
Length declared	148.8 in · 3,780 mm	152.6 in · 3,877 mm	—
Width declared	74.4 in · 1,890 mm	85.7 in · 2,177 mm	+15% 800
Height declared	92.9 in · 2,360 mm	106.3 in · 2,700 mm	+14% 800
Ground clearance declared	13.4 in · 340 mm	19.9 in · 505 mm	+49% 800
Turning radius, braked declared	—	15.7 ft · 4.80 m	—
Fuel tank declared	100.4 qt · 95 L	83.5 qt · 79.0 L	+20% DX 3.80 AS

Source

Source