Deutz-Fahr DX 3.80 AS vs New Holland TL 80 (A)

12 material differences

Tractor one

1985–1990

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.80 AS and the TL 80 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.80 AS and New Holland TL 80 (A), field by field
Field	DX 3.80 AS	TL 80 (A)	Gap
Engine
Engine power, claimed claimed	74 hp	74.0 hp	—
Engine declared	KHD F4L 913	Iveco 8045.05 R	differs
Displacement declared	4.09 L	3.91 L	—
Maximum torque declared	192 lb·ft · 260 N·m	188 lb·ft · 255 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.6 gpm · 40.0 L/min	15.9 gpm · 60.0 L/min	+50% TL 80 (A)
Pressure declared	3,481 psi · 240 bar	2,103 psi · 145 bar	+66% DX 3.80 AS
Three-point lift at ends declared	5,291 lb · 2,400 kg	7,385 lb · 3,350 kg	+40% TL 80 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,275 lb · 3,300 kg	9,149 lb · 4,150 kg	+26% TL 80 (A)
Maximum permissible mass declared	8,818 lb · 4,000 kg	11,464 lb · 5,200 kg	+30% TL 80 (A)
Wheelbase declared	88.6 in · 2,250 mm	92.2 in · 2,342 mm	—
Length declared	148.8 in · 3,780 mm	168.5 in · 4,280 mm	+13% TL 80 (A)
Width declared	74.4 in · 1,890 mm	78.9 in · 2,005 mm	+6% TL 80 (A)
Height declared	92.9 in · 2,360 mm	97.4 in · 2,475 mm	—
Ground clearance declared	13.4 in · 340 mm	15.0 in · 380 mm	+12% TL 80 (A)
Turning radius, braked declared	—	11.3 ft · 3.45 m	—
Fuel tank declared	100.4 qt · 95 L	121.5 qt · 115.0 L	+21% TL 80 (A)

Source

Source