Deutz-Fahr DX 3.70 vs Renault 68-12 RS

6 material differences · fewer than 12

Tractor one

1984–1989

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.70 and the 68-12 RS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.70 and Renault 68-12 RS, field by field
Field	DX 3.70	68-12 RS	Gap
Engine
Engine power, claimed claimed	69.1 hp	67 hp	—
Engine declared	KHD F4L 912	MWM D 227-4	differs
Displacement declared	3.77 L	3.77 L	—
Maximum torque declared	173 lb·ft · 234 N·m	166 lb·ft · 225 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	independent dry double clutch	Dry LuK dual clutch	differs
Hydraulics & hitch
Pump flow declared	—	10.9 gpm · 41.2 L/min	—
Pressure declared	3,481 psi · 240 bar	1,595 psi · 110 bar	+118% DX 3.70
Three-point lift at ends declared	5,732 lb · 2,600 kg	6,614 lb · 3,000 kg	+15% 68-12 RS
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	6,702 lb · 3,040 kg	—
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	91.6 in · 2,327 mm	95.7 in · 2,430 mm	—
Length declared	153.9 in · 3,910 mm	154.7 in · 3,930 mm	—
Width declared	84.2 in · 2,138 mm	71.7 in · 1,820 mm	+17% DX 3.70
Height declared	97.2 in · 2,470 mm	100.8 in · 2,560 mm	—
Ground clearance declared	18.0 in · 457 mm	—	—
Turning radius, braked declared	—	13.3 ft · 4.05 m	—
Fuel tank declared	100.4 qt · 95 L	114.1 qt · 108.0 L	+14% 68-12 RS

Source

Source