8 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.701984–1989No measured PTO figureTractor twoFiat 70-90 (DT)1984–1992No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.70 and the 70-90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.70 and Fiat 70-90 (DT), field by field
Field	DX 3.70	70-90 (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	FIAT-IVECO 8045.06.200 or 300	differs
Displacement declared	3.77 L	3.61 L	—
Maximum torque declared	173 lb·ft · 234 N·m	168 lb·ft · 228 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	independent dry double clutch	Dry VALEO, O.M.G. or LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	—	9.4 gpm · 35.5 L/min	—
Pressure declared	3,481 psi · 240 bar	3,046–3,118 psi · 210–215 bar	differs
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	6,702 lb · 3,040 kg	—
Maximum permissible mass declared	11,023 lb · 5,000 kg	11,684 lb · 5,300 kg	+6% 70-90 (DT)
Wheelbase declared	91.6 in · 2,327 mm	92.2 in · 2,342 mm	—
Length declared	153.9 in · 3,910 mm	152.9 in · 3,884 mm	—
Width declared	84.2 in · 2,138 mm	76.0–99.6 in · 1,930–2,530 mm	differs
Height, over the cab declared	97.2 in · 2,470 mm	103.0 in · 2,615 mm	+6% 70-90 (DT)
Ground clearance declared	18.0 in · 457 mm	19.9 in · 505 mm	+11% 70-90 (DT)
Turning radius, braked declared	—	11.4 ft · 3.48 m	—
Fuel tank declared	100.4 qt · 95 L	98.3 qt · 93.0 L	—

Source

Source