8 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.701984–1989No measured PTO figureTractor twoDeutz-Fahr DX 4.101985–1988No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.70 and the DX 4.10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.70 and Deutz-Fahr DX 4.10, field by field
Field	DX 3.70	DX 4.10	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	KHD F4L 912	—
Displacement declared	3.77 L	3.77 L	—
Maximum torque declared	173 lb·ft · 234 N·m	175 lb·ft · 237 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	independent dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	—	10.6 gpm · 40.0 L/min	—
Pressure declared	3,481 psi · 240 bar	3,481 psi · 240 bar	—
Three-point lift, at the coupling points declared	5,732 lb · 2,600 kg	8,378 lb · 3,800 kg	+46% DX 4.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	8,642 lb · 3,920 kg	+25% DX 4.10
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	91.6 in · 2,327 mm	94.5 in · 2,400 mm	—
Length declared	153.9 in · 3,910 mm	163.0 in · 4,140 mm	+6% DX 4.10
Width declared	84.2 in · 2,138 mm	90.6 in · 2,300 mm	+8% DX 4.10
Height, over the cab declared	97.2 in · 2,470 mm	103.0 in · 2,615 mm	+6% DX 4.10
Ground clearance declared	18.0 in · 457 mm	16.7 in · 425 mm	+8% DX 3.70
Turning radius, braked declared	—	13.7 ft · 4.17 m	—
Fuel tank declared	100.4 qt · 95 L	132.1 qt · 125 L	+32% DX 4.10

Source

Source