9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 3.651987–1996No measured PTO figureTractor twoDeutz-Fahr DX 4.101985–1988No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.65 and the DX 4.10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.65 and Deutz-Fahr DX 4.10, field by field
Field	DX 3.65	DX 4.10	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 912	KHD F4L 912	—
Displacement declared	3.77 L	3.77 L	—
Maximum torque declared	180 lb·ft · 244 N·m	175 lb·ft · 237 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	11.3 gpm · 42.6 L/min	10.6 gpm · 40.0 L/min	+7% DX 3.65
Pressure declared	3,481 psi · 240 bar	3,481 psi · 240 bar	—
Three-point lift, at the coupling points declared	7,275 lb · 3,300 kg	8,378 lb · 3,800 kg	+15% DX 4.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	8,642 lb · 3,920 kg	+15% DX 4.10
Maximum permissible mass declared	11,023 lb · 5,000 kg	—	—
Wheelbase declared	88.6 in · 2,250 mm	94.5 in · 2,400 mm	+7% DX 4.10
Length declared	150.4 in · 3,820 mm	163.0 in · 4,140 mm	+8% DX 4.10
Width declared	85.9 in · 2,183 mm	90.6 in · 2,300 mm	+5% DX 4.10
Height, over the cab declared	101.6 in · 2,580 mm	103.0 in · 2,615 mm	—
Ground clearance declared	16.1 in · 408 mm	16.7 in · 425 mm	—
Turning radius, braked declared	15.1 ft · 4.60 m	13.7 ft · 4.17 m	+10% DX 3.65
Fuel tank declared	76.1 qt · 72 L	132.1 qt · 125 L	+74% DX 4.10

Source

Source