Deutz-Fahr DX 3.60 vs Renault 70-14 V

12 material differences

Tractor one

1986–1996

No measured PTO figure

Tractor two

1986–1999

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.60 and the 70-14 V → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.60 and Renault 70-14 V, field by field
Field	DX 3.60	70-14 V	Gap
Engine
Engine power, claimed claimed	63.8 hp	66.1 hp	—
Engine declared	KHD F4L 912	KLÖCKNER-HUMBOLDT-DEUTZ F4L 912	differs
Displacement declared	3.77 L	3.77 L	—
Maximum torque declared	162 lb·ft · 220 N·m	164 lb·ft · 223 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry OMG double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.8 gpm · 41.0 L/min	11.4 gpm · 43.3 L/min	+6% 70-14 V
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	7,893 lb · 3,580 kg	+49% 70-14 V
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,338 lb · 2,875 kg	4,586 lb · 2,080 kg	+38% DX 3.60
Maximum permissible mass declared	10,362 lb · 4,700 kg	—	—
Wheelbase declared	88.5 in · 2,249 mm	81.7 in · 2,075 mm	+8% DX 3.60
Length declared	145.3 in · 3,690 mm	137.7 in · 3,498 mm	+5% DX 3.60
Width declared	84.2 in · 2,138 mm	43.9 in · 1,115 mm	+92% DX 3.60
Height declared	92.9 in · 2,360 mm	92.2 in · 2,343 mm	—
Ground clearance declared	18.0 in · 457 mm	11.0 in · 280 mm	+63% DX 3.60
Fuel tank declared	76.1 qt · 72 L	65.5 qt · 62.0 L	+16% DX 3.60

Source

Source