Deutz-Fahr DX 3.60 vs J.I. Case 1390 (DT)

11 material differences · fewer than 12

Tractor one

1986–1996

No measured PTO figure

Tractor two

1980–1984

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.60 and the 1390 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.60 and J.I. Case 1390 (DT), field by field
Field	DX 3.60	1390 (DT)	Gap
Engine
Engine power, claimed claimed	63.8 hp	66.1 hp	—
Engine declared	KHD F4L 912	DAVID BROWN AD 4/55	differs
Displacement declared	3.77 L	3.20 L	+18% DX 3.60
Maximum torque declared	162 lb·ft · 220 N·m	168 lb·ft · 228 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry Borg and Beck double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.8 gpm · 41.0 L/min	8.7 gpm · 32.9 L/min	+25% DX 3.60
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,338 lb · 2,875 kg	6,363 lb · 2,886 kg	—
Maximum permissible mass declared	10,362 lb · 4,700 kg	—	—
Wheelbase declared	88.5 in · 2,249 mm	83.0 in · 2,108 mm	+7% DX 3.60
Length declared	145.3 in · 3,690 mm	142.9 in · 3,630 mm	—
Width declared	84.2 in · 2,138 mm	72.8 in · 1,850 mm	+16% DX 3.60
Height declared	92.9 in · 2,360 mm	100.0 in · 2,540 mm	+8% 1390 (DT)
Ground clearance declared	18.0 in · 457 mm	15.0 in · 381 mm	+20% DX 3.60
Turning radius, braked declared	—	10.5 ft · 3.20 m	—
Fuel tank declared	76.1 qt · 72 L	99.3 qt · 94.0 L	+31% 1390 (DT)

Source

Source