Deutz-Fahr DX 3.60 vs Fiat 680 (DT)
11 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1986–1996; 1978–1984). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | DX 3.60 | 680 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 63.8 hp | 67 hp | — |
| Engine declared | KHD F4L 912 | FIAT-IVECO 8045.02.270 (370) | differs |
| Displacement declared | 3.77 L | 3.46 L | +9% DX 3.60 |
| Maximum torque declared | 162 lb·ft · 220 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Independent dry double clutch | Dry FERODO or LuK double clutch with separate PTO control | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 10.8 gpm · 41.0 L/min | 6.8 gpm · 25.8 L/min | +59% DX 3.60 |
| Pressure declared | 3,481 psi · 240 bar | 2,843 psi · 196 bar | +22% DX 3.60 |
| Three-point lift at ends declared | 5,291 lb · 2,400 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,338 lb · 2,875 kg | 7,275 lb · 3,300 kg | +15% 680 (DT) |
| Maximum permissible mass declared | 10,362 lb · 4,700 kg | — | — |
| Wheelbase declared | 88.5 in · 2,249 mm | 89.2 in · 2,265 mm | — |
| Length declared | 145.3 in · 3,690 mm | 138.1 in · 3,507 mm | — |
| Width declared | 84.2 in · 2,138 mm | 68.9 in · 1,750 mm | +22% DX 3.60 |
| Height declared | 92.9 in · 2,360 mm | 100.6 in · 2,555 mm | +8% 680 (DT) |
| Ground clearance declared | 18.0 in · 457 mm | 20.1 in · 511 mm | +12% 680 (DT) |
| Turning radius, braked declared | — | 11.2 ft · 3.40 m | — |
| Fuel tank declared | 76.1 qt · 72 L | 84.5 qt · 80.0 L | +11% 680 (DT) |
Deutz-Fahr DX 3.60 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.60”
- Source: Traktorenlexikon, “Deutz D 6006”
Fiat 680 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 680 /680 DT”