Deutz-Fahr DX 3.50 vs ZETOR 7211/7245

10 material differences · fewer than 12

Tractor one

1984–1996

No measured PTO figure

Tractor two

1984–1993

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.50 and the 7211/7245 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.50 and ZETOR 7211/7245, field by field
Field	DX 3.50	7211/7245	Gap
Engine
Engine power, claimed claimed	59 hp	65.0 hp	+10% 7211/7245
Engine declared	KHD F3L 913	ZBROJORKA Z-7201	differs
Displacement declared	3.06 L	3.60 L	+17% 7211/7245
Maximum torque declared	144 lb·ft · 195 N·m	156 lb·ft · 212 N·m	+9% 7211/7245
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	Dry Zbrojovka double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.0 gpm · 38.0 L/min	15.0 gpm · 56.6 L/min	+49% 7211/7245
Pressure declared	—	1,160 psi · 80 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,019–6,878 lb · 2,730–3,120 kg	7,033 lb · 3,190 kg	differs
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	88.9 in · 2,257 mm	+12% 7211/7245
Length declared	142.9 in · 3,630 mm	148.0 in · 3,760 mm	—
Width declared	84.2 in · 2,138 mm	87.8 in · 2,230 mm	—
Height declared	92.5–103.1 in · 2,350–2,620 mm	105.9 in · 2,690 mm	differs
Ground clearance declared	18.0 in · 457 mm	16.3 in · 415 mm	+10% DX 3.50
Turning radius, braked declared	11.8 ft · 3.60 m	11.6 ft · 3.54 m	—
Fuel tank declared	—	74.0 qt · 70.0 L	—

Source

Source