Deutz-Fahr DX 3.50 vs ZETOR 6711

11 material differences · fewer than 12

Tractor one

1984–1996

No measured PTO figure

Tractor two

1972–1977

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.50 and the 6711 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.50 and ZETOR 6711, field by field
Field	DX 3.50	6711	Gap
Engine
Engine power, claimed claimed	59 hp	64.1 hp	+9% 6711
Engine declared	KHD F3L 913	ZETOR Z-6701	differs
Displacement declared	3.06 L	3.46 L	+13% 6711
Maximum torque declared	144 lb·ft · 195 N·m	148 lb·ft · 201 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Independent dry double clutch	Pedal-actuated, dry two-stage ZETOR double clutch with mechanical clutch booster	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.0 gpm · 38.0 L/min	5.3 gpm · 20.0 L/min	+90% DX 3.50
Three-point lift at ends declared	5,291 lb · 2,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019–6,878 lb · 2,730–3,120 kg	5,776 lb · 2,620 kg	differs
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	88.5 in · 2,247 mm	+12% 6711
Length declared	142.9 in · 3,630 mm	144.5 in · 3,670 mm	—
Width declared	84.2 in · 2,138 mm	70.5 in · 1,790 mm	+19% DX 3.50
Height declared	92.5–103.1 in · 2,350–2,620 mm	64.4 in · 1,635 mm	differs
Ground clearance declared	18.0 in · 457 mm	13.0 in · 330 mm	+38% DX 3.50
Turning radius, braked declared	11.8 ft · 3.60 m	11.7 ft · 3.56 m	—
Fuel tank declared	—	83.5 qt · 79.0 L	—

Source

Source