Deutz-Fahr DX 3.50 vs VALMET 4400

11 material differences · fewer than 12

Tractor one

1984–1996

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.50 and the 4400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.50 and VALMET 4400, field by field
Field	DX 3.50	4400	Gap
Engine
Engine power, claimed claimed	59 hp	66.1 hp	+12% 4400
Engine declared	KHD F3L 913	VALMET 320 DS	differs
Displacement declared	3.06 L	3.30 L	+8% 4400
Maximum torque declared	144 lb·ft · 195 N·m	177 lb·ft · 240 N·m	+23% 4400
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	10.0 gpm · 38.0 L/min	10.3 gpm · 39.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	6,294 lb · 2,855 kg	+19% 4400
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019–6,878 lb · 2,730–3,120 kg	6,151 lb · 2,790 kg	differs
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	83.1 in · 2,112 mm	—
Length declared	142.9 in · 3,630 mm	149.2 in · 3,790 mm	—
Width declared	84.2 in · 2,138 mm	80.0 in · 2,032 mm	—
Height declared	92.5–103.1 in · 2,350–2,620 mm	94.1 in · 2,390 mm	differs
Ground clearance declared	18.0 in · 457 mm	19.9 in · 505 mm	+11% 4400
Turning radius, braked declared	11.8 ft · 3.60 m	12.8 ft · 3.90 m	+8% 4400
Fuel tank declared	—	100.4 qt · 95.0 L	—

Source

Source