10 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 3.501984–1996No measured PTO figureTractor twoEicher Mammut 33541974–1978No measured PTO figure
Which should you choose?
Read our verdict on the DX 3.50 and the Mammut 3354 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | DX 3.50 | Mammut 3354 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59 hp | 54.0 hp | +9% DX 3.50 |
| Engine declared | KHD F3L 913 | Perkins AD 4.203 | differs |
| Displacement declared | 3.06 L | 3.34 L | +9% Mammut 3354 |
| Maximum torque declared | 144 lb·ft · 195 N·m | 162 lb·ft · 220 N·m | +13% Mammut 3354 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 14.9 mph · 24 km/h | differs |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 10.0 gpm · 38.0 L/min | 5.0 gpm · 19.0 L/min | +100% DX 3.50 |
| Pressure declared | — | 2,987 psi · 206 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,019–6,878 lb · 2,730–3,120 kg | 5,842 lb · 2,650 kg | differs |
| Maximum permissible mass declared | 10,141 lb · 4,600 kg | — | — |
| Wheelbase declared | 79.2 in · 2,012 mm | 84.4 in · 2,145 mm | +7% Mammut 3354 |
| Length declared | 142.9 in · 3,630 mm | 132.7 in · 3,370 mm | +8% DX 3.50 |
| Width declared | 84.2 in · 2,138 mm | 72.8 in · 1,850 mm | +16% DX 3.50 |
| Ground clearance declared | 18.0 in · 457 mm | — | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | — | 71.9 qt · 68 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 3.50 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 3.50”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
Eicher Mammut 3354 sources
- Source: Traktorenlexikon, “Eicher 3354 Mammut 74 A”