Deutz-Fahr DX 3.30 vs VALMET 600

13 material differences

Tractor one

1984–1996

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.30 and the 600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.30 and VALMET 600, field by field
Field	DX 3.30	600	Gap
Engine
Engine power, claimed claimed	54 hp	59.1 hp	+10% 600
Engine declared	KHD F3L 912	VALMET 320 D	differs
Displacement declared	2.83 L	3.30 L	+17% 600
Maximum torque declared	119 lb·ft · 162 N·m	162 lb·ft · 220 N·m	+36% 600
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	10.0 gpm · 38.0 L/min	14.7 gpm · 55.7 L/min	+47% 600
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% DX 3.30
Three-point lift at ends declared	4,699 lb · 2,131 kg	6,294 lb · 2,855 kg	+34% 600
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	6,900 lb · 3,130 kg	+15% 600
Wheelbase declared	79.2 in · 2,012 mm	83.1 in · 2,112 mm	—
Length declared	137.4 in · 3,490 mm	147.4 in · 3,745 mm	+7% 600
Width declared	72.8 in · 1,848 mm	84.2 in · 2,139 mm	+16% 600
Height declared	91.7 in · 2,330 mm	104.7 in · 2,660 mm	+14% 600
Ground clearance declared	16.1 in · 410 mm	19.9 in · 505 mm	+23% 600
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	87.7 qt · 83 L	83.5 qt · 79.0 L	—

Source

Source