Deutz-Fahr DX 3.30 vs SAME Minitaurus 60

9 material differences · fewer than 12

Tractor one

1984–1996

No measured PTO figure

Tractor two

1978–1984

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.30 and the Minitaurus 60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.30 and SAME Minitaurus 60, field by field
Field	DX 3.30	Minitaurus 60	Gap
Engine
Engine power, claimed claimed	54 hp	59.1 hp	+10% Minitaurus 60
Engine declared	KHD F3L 912	SAME DA 1053 P	differs
Displacement declared	2.83 L	3.12 L	+10% Minitaurus 60
Maximum torque declared	119 lb·ft · 162 N·m	162 lb·ft · 220 N·m	+36% Minitaurus 60
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	6.3 gpm · 24.0 L/min	+58% DX 3.30
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,699 lb · 2,131 kg	4,542 lb · 2,060 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	4,828 lb · 2,190 kg	+25% DX 3.30
Wheelbase declared	79.2 in · 2,012 mm	84.3 in · 2,140 mm	+6% Minitaurus 60
Length declared	137.4 in · 3,490 mm	137.8 in · 3,500 mm	—
Width declared	72.8 in · 1,848 mm	73.8 in · 1,875 mm	—
Height declared	91.7 in · 2,330 mm	90.9 in · 2,310 mm	—
Ground clearance declared	16.1 in · 410 mm	16.5 in · 420 mm	—
Turning radius, braked declared	—	10.2 ft · 3.10 m	—
Fuel tank declared	87.7 qt · 83 L	105.7 qt · 100.0 L	+20% Minitaurus 60

Source

Source