12 material differences

Tractor oneDeutz-Fahr DX 3.301984–1996No measured PTO figureTractor twoJ.I. Case 1290 (DT)1980–1984No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.30 and the 1290 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.30 and J.I. Case 1290 (DT), field by field
Field	DX 3.30	1290 (DT)	Gap
Engine
Engine power, claimed claimed	54 hp	57.3 hp	+7% 1290 (DT)
Engine declared	KHD F3L 912	DAVID BROWN AD 4/49 or AD 4/55	differs
Displacement declared	2.83 L	3.20 L	+13% 1290 (DT)
Maximum torque declared	119 lb·ft · 162 N·m	145 lb·ft · 197 N·m	+22% 1290 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Dry Borg & Beck double clutch	differs
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	7.5 gpm · 28.4 L/min	+34% DX 3.30
Pressure declared	3,481 psi · 240 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,019 lb · 2,730 kg	6,572 lb · 2,981 kg	+9% 1290 (DT)
Wheelbase declared	79.2 in · 2,012 mm	83.0 in · 2,108 mm	—
Length declared	137.4 in · 3,490 mm	142.9 in · 3,630 mm	—
Width declared	72.8 in · 1,848 mm	77.6–97.2 in · 1,970–2,470 mm	differs
Height, over the cab declared	91.7 in · 2,330 mm	98.0 in · 2,490 mm	+7% 1290 (DT)
Ground clearance declared	16.1 in · 410 mm	21.0 in · 533 mm	+30% 1290 (DT)
Turning radius, braked declared	—	10.4 ft · 3.18 m	—
Fuel tank declared	87.7 qt · 83 L	76.0 qt · 71.9 L	+15% DX 3.30

Source

Source