Deutz-Fahr DX 3.10 vs Landini TL 33 N/A (R 5530 F)

10 material differences · fewer than 12

Tractor one

1984–1990

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.10 and the TL 33 N/A (R 5530 F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.10 and Landini TL 33 N/A (R 5530 F), field by field
Field	DX 3.10	TL 33 N/A (R 5530 F)	Gap
Engine
Engine power, claimed claimed	46 hp	47.3 hp	—
Engine declared	KHD F3L 912	Perkins AD 3.152 S	differs
Displacement declared	2.83 L	2.50 L	+13% DX 3.10
Maximum torque declared	123 lb·ft · 167 N·m	130 lb·ft · 176 N·m	+5% TL 33 N/A (R 5530 F)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	Dry Luk double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	9.1 gpm · 34.4 L/min	9.8 gpm · 37.1 L/min	+8% TL 33 N/A (R 5530 F)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,189 lb · 1,900 kg	3,600 lb · 1,633 kg	+16% DX 3.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	4,200 lb · 1,905 kg	+33% DX 3.10
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	77.0 in · 1,955 mm	—
Length declared	137.4 in · 3,490 mm	131.1 in · 3,330 mm	—
Width declared	70.4 in · 1,788 mm	52.3 in · 1,328 mm	+35% DX 3.10
Height declared	91.1 in · 2,315 mm	91.7 in · 2,330 mm	—
Ground clearance declared	16.1 in · 410 mm	12.7 in · 323 mm	+27% DX 3.10
Turning radius, braked declared	—	10.3 ft · 3.15 m	—
Fuel tank declared	87.7 qt · 83 L	56.0 qt · 53.0 L	+57% DX 3.10

Source

Source