Deutz-Fahr DX 3.10 vs IMT 560

10 material differences · fewer than 12

Tractor one

1984–1990

No measured PTO figure

Tractor two

1980–1986

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.10 and the 560 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.10 and IMT 560, field by field
Field	DX 3.10	560	Gap
Engine
Engine power, claimed claimed	46 hp	57.3 hp	+26% 560
Engine declared	KHD F3L 912	IMT-PERKINS M-34/T	differs
Displacement declared	2.83 L	3.33 L	+18% 560
Maximum torque declared	123 lb·ft · 167 N·m	144 lb·ft · 195 N·m	+17% 560
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	Pedal-operated dry two-stage double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	9.1 gpm · 34.4 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,189 lb · 1,900 kg	3,869 lb · 1,755 kg	+8% DX 3.10
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	5,445 lb · 2,470 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	87.0 in · 2,210 mm	+10% 560
Length declared	137.4 in · 3,490 mm	156.5 in · 3,975 mm	+14% 560
Width declared	70.4 in · 1,788 mm	69.3 in · 1,760 mm	—
Height declared	91.1 in · 2,315 mm	87.0 in · 2,210 mm	—
Ground clearance declared	16.1 in · 410 mm	17.1 in · 434 mm	+6% 560
Turning radius, braked declared	—	13.2 ft · 4.03 m	—
Fuel tank declared	87.7 qt · 83 L	95.1–116.2 qt · 90.0–110.0 L	differs

Source

Source