Deutz-Fahr DX 3.10 vs IMT 588

13 material differences

Tractor one

1984–1990

No measured PTO figure

Tractor two

1970–1980

No measured PTO figure

Which should you choose?

Read our verdict on the DX 3.10 and the 588 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 3.10 and IMT 588, field by field
Field	DX 3.10	588	Gap
Engine
Engine power, claimed claimed	46 hp	57.3 hp	+26% 588
Engine declared	KHD F3L 912	IMR-PERKINS M-34/T	differs
Displacement declared	2.83 L	3.34 L	+18% 588
Maximum torque declared	123 lb·ft · 167 N·m	154 lb·ft · 209 N·m	+25% 588
Transmission
Top speed declared	18.6 mph · 30 km/h	13.7 mph · 22 km/h	+36% DX 3.10
Clutch declared	Independent dry double clutch	Pedal-operated, dry two-stage KRON-NOVI double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	9.1 gpm · 34.4 L/min	4.0 gpm · 15.1 L/min	+128% DX 3.10
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,189 lb · 1,900 kg	2,469 lb · 1,120 kg	+70% DX 3.10
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	5,071 lb · 2,300 kg	+10% DX 3.10
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	79.2 in · 2,012 mm	83.4 in · 2,118 mm	+5% 588
Length declared	137.4 in · 3,490 mm	146.3 in · 3,715 mm	+6% 588
Width declared	70.4 in · 1,788 mm	71.2 in · 1,808 mm	—
Height declared	91.1 in · 2,315 mm	63.7 in · 1,618 mm	+43% DX 3.10
Ground clearance declared	16.1 in · 410 mm	16.9 in · 430 mm	—
Turning radius, braked declared	—	12.5 ft · 3.80 m	—
Fuel tank declared	87.7 qt · 83 L	52.8 qt · 50.0 L	+66% DX 3.10

Source

Source