Deutz-Fahr DX 160 vs Massey Ferguson MF 1132

11 material differences · fewer than 12

Tractor one

1978–1984

No measured PTO figure

Tractor two

1977–1982

No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the MF 1132 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and Massey Ferguson MF 1132, field by field
Field	DX 160	MF 1132	Gap
Engine
Engine power, claimed claimed	148.0 hp	131.3 hp	+13% DX 160
Engine declared	KHD BF6L 913	Eicher EDK 6-5	differs
Displacement declared	6.13 L	5.89 L	—
Maximum torque declared	393 lb·ft · 533 N·m	332 lb·ft · 450 N·m	+18% DX 160
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated, dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	15.4 gpm · 58.4 L/min	11.9 gpm · 45.0 L/min	+30% DX 160
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	6,173 lb · 2,800 kg	+132% DX 160
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	12,919 lb · 5,860 kg	+9% MF 1132
Maximum permissible mass declared	18,739 lb · 8,500 kg	16,535 lb · 7,500 kg	+13% DX 160
Wheelbase declared	103.6 in · 2,631 mm	107.5 in · 2,730 mm	—
Length declared	185.4 in · 4,710 mm	181.5 in · 4,610 mm	—
Width declared	93.3 in · 2,370 mm	91.7 in · 2,330 mm	—
Height declared	107.5 in · 2,730 mm	107.1 in · 2,720 mm	—
Ground clearance declared	23.8 in · 605 mm	17.1 in · 435 mm	+39% DX 160
Turning radius, braked declared	14.7 ft · 4.47 m	17.7 ft · 5.40 m	+21% MF 1132
Fuel tank declared	158.5 qt · 150 L	262.1 qt · 248.0 L	+65% MF 1132

Source

Source