Deutz-Fahr D 6907 A ( C ) vs Deutz-Fahr DX 4.10

9 material differences · fewer than 12

Tractor one

1983–1984

No measured PTO figure

Tractor two

1985–1988

No measured PTO figure

Which should you choose?

Read our verdict on the D 6907 A ( C ) and the DX 4.10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6907 A ( C ) and Deutz-Fahr DX 4.10, field by field
Field	D 6907 A ( C )	DX 4.10	Gap
Engine
Engine power, claimed claimed	68 hp	69.1 hp	—
Engine declared	KHD F4L 912	KHD F4L 912	—
Displacement declared	3.77 L	3.77 L	—
Maximum torque declared	175 lb·ft · 237 N·m	175 lb·ft · 237 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	10.6 gpm · 40.0 L/min	—
Pressure declared	—	3,481 psi · 240 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	8,378 lb · 3,800 kg	+58% DX 4.10
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,393 lb · 2,900 kg	8,642 lb · 3,920 kg	+35% DX 4.10
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	85.8 in · 2,180 mm	94.5 in · 2,400 mm	+10% DX 4.10
Length declared	144.3 in · 3,664 mm	163.0 in · 4,140 mm	+13% DX 4.10
Width declared	81.1 in · 2,060 mm	90.6 in · 2,300 mm	+12% DX 4.10
Height declared	96.6 in · 2,454 mm	103.0 in · 2,615 mm	+7% DX 4.10
Ground clearance declared	15.0 in · 380 mm	16.7 in · 425 mm	+12% DX 4.10
Turning radius, braked declared	—	13.7 ft · 4.17 m	—
Fuel tank declared	95.1 qt · 90 L	132.1 qt · 125 L	+39% DX 4.10

Source

Source