Deutz-Fahr D 6507 (C) vs ZETOR 7011/7045

9 material differences · fewer than 12

Tractor one

1982–1984

No measured PTO figure

Tractor two

1980–1984

No measured PTO figure

Which should you choose?

Read our verdict on the D 6507 (C) and the 7011/7045 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6507 (C) and ZETOR 7011/7045, field by field
Field	D 6507 (C)	7011/7045	Gap
Engine
Engine power, claimed claimed	62 hp	64.1 hp	—
Engine declared	KHD F4L 912	ZBROJORKA Z-7001	differs
Displacement declared	3.77 L	3.60 L	—
Maximum torque declared	174 lb·ft · 236 N·m	148 lb·ft · 200 N·m	+18% D 6507 (C)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% D 6507 (C)
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.4 gpm · 31.8 L/min	6.0 gpm · 22.9 L/min	+39% D 6507 (C)
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	5,291 lb · 2,400 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	6,460 lb · 2,930 kg	+16% 7011/7045
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	88.5 in · 2,247 mm	+6% 7011/7045
Length declared	148.0 in · 3,760 mm	146.5 in · 3,720 mm	—
Width declared	81.1 in · 2,060 mm	72.8 in · 1,850 mm	+11% D 6507 (C)
Height declared	96.5 in · 2,450 mm	104.3 in · 2,650 mm	+8% 7011/7045
Ground clearance declared	19.3 in · 490 mm	19.3 in · 490 mm	—
Turning radius, braked declared	11.7 ft · 3.58 m	11.7 ft · 3.57 m	—
Fuel tank declared	74.0 qt · 70 L	74.0 qt · 70.0 L	—

Source

Source