Deutz-Fahr D 6207 (C) vs Landini R 8000 Special (TL-15 N)

9 material differences · fewer than 12

Tractor one

1981–1982

No measured PTO figure

Tractor two

1967–1974

No measured PTO figure

Which should you choose?

Read our verdict on the D 6207 (C) and the R 8000 Special (TL-15 N) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr D 6207 (C) and Landini R 8000 Special (TL-15 N), field by field
Field	D 6207 (C)	R 8000 Special (TL-15 N)	Gap
Engine
Engine power, claimed claimed	59 hp	63.2 hp	+7% R 8000 Special (TL-15 N)
Engine declared	KHD F4L 912	Perkins A 4.212	differs
Displacement declared	3.77 L	3.47 L	+8% D 6207 (C)
Maximum torque declared	169 lb·ft · 229 N·m	166 lb·ft · 226 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.3 gpm · 35.3 L/min	7.3 gpm · 27.8 L/min	+27% D 6207 (C)
Three-point lift at ends declared	5,291 lb · 2,400 kg	2,866 lb · 1,300 kg	+85% D 6207 (C)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,578 lb · 2,530 kg	5,600 lb · 2,540 kg	—
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	83.7 in · 2,125 mm	85.4 in · 2,170 mm	—
Length declared	148.0 in · 3,760 mm	143.3 in · 3,640 mm	—
Width declared	81.1 in · 2,060 mm	72.8 in · 1,850 mm	+11% D 6207 (C)
Height declared	97.6 in · 2,480 mm	66.5 in · 1,690 mm	+47% D 6207 (C)
Ground clearance declared	20.9 in · 530 mm	17.3 in · 440 mm	+20% D 6207 (C)
Turning radius, braked declared	11.9 ft · 3.63 m	12.3 ft · 3.76 m	—
Fuel tank declared	74.0 qt · 70 L	90.9 qt · 86.0 L	+23% R 8000 Special (TL-15 N)

Source

Source