10 material differences · fewer than 12
Tractor oneDeutz-Fahr AgroXtra 3.571991–1996No measured PTO figureTractor twoInternational Harvester 5851981–1990No measured PTO figure
Which should you choose?
Read our verdict on the AgroXtra 3.57 and the 585 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | AgroXtra 3.57 | 585 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58.9 hp | 58.2 hp | — |
| Engine declared | KHD F3L 913 | INTERNATIONAL-HARVESTER D-206 | differs |
| Displacement declared | 3.06 L | 3.38 L | +10% 585 |
| Maximum torque declared | 144 lb·ft · 195 N·m | 161 lb·ft · 218 N·m | +12% 585 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Independent, dry double clutch | Pedal-operated dry LAYCOCK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.0 gpm · 38.0 L/min | — | — |
| Pressure declared | — | 2,698 psi · 186 bar | — |
| Three-point lift, at the coupling points declared | 5,291 lb · 2,400 kg | 4,398 lb · 1,995 kg | +20% AgroXtra 3.57 |
| Rear PTO speeds declared | 540/1000/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,253 lb · 3,290 kg | 6,393 lb · 2,900 kg | +13% AgroXtra 3.57 |
| Maximum permissible mass declared | 9,921 lb · 4,500 kg | — | — |
| Wheelbase declared | 81.9 in · 2,079 mm | 85.0 in · 2,159 mm | — |
| Length declared | 144.9 in · 3,680 mm | 142.1 in · 3,610 mm | — |
| Width declared | 73.7 in · 1,872 mm | 72.8 in · 1,850 mm | — |
| Ground clearance declared | 14.0 in · 355 mm | 14.1 in · 358 mm | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 10.7 ft · 3.25 m | +11% AgroXtra 3.57 |
| Fuel tank declared | 87.7 qt · 83 L | 118.3 qt · 112.0 L | +35% 585 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr AgroXtra 3.57 sources
- Source: Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
International Harvester 585 sources
- Source: Traktorenlexikon, “IHC 585 (XL)”
- Source: Traktorenlexikon, “McCormick 624 (A)”